Komatsu PC2000-8 Mining Excavator Price, Specifications & Features

Komatsu PC2000-8 Price, Specs, Review, Overview

Komatsu’s construction equipment “Operator First” design concept is exemplified in the Komatsu PC2000-8 Hydraulic Excavator.

The cab is built for mining with 30% more cab volume, a full front window with two wipers, OPG level 2 top cab guard, extensive exterior lighting, a 7” LCD color monitor with Eco-gauge and an air suspension seat.

The driver can tailor his machine performance using the Economy, Power or Heavy Lift modes for maximizing efficiency.

So, guys!! Are you looking for an article, in which you find the Komatsu PC2000-8 Hydraulic Excavator Price List, Specifications, Features Images and More? then let me tell you, you are landed at the perfect place, because here in this article of mine I am going to share with you that all kinds of information in detail which you are needed, ok my friends let’s check it out.


Komatsu PC2000-8 Hydraulic Excavator Price

Komatsu PC2000-8 Hydraulic Excavator Price


Komatsu PC2000-8 Price entered as: AUD $1,025,000


Komatsu PC2000-8 Hydraulic Excavator Standard Features



  • Air cleaner, double element dry (Inside mounted)
  • Two cooling fans with fan guard (Hydraulic drive, for radiator and oil cooler)
  • Engine, Komatsu SAA12V140E-3
  • Fuel pre-filters with water separators
  • Corrosion resistors



  • Alternators, 2 x 90 amp, 24V
  • Batteries, 140 Ah, 4 x 12V
  • Starting motors, 2 x 11 kW
  • Working lights, 4 boom, 4 cab base, 3 fuel tank top front, 1 left front and 1 left under cab side catwalk
  • Auto decelerator and auto idling system
  • AM/FM radio
  • Lighted switches on instrument panel



  • 810 mm / 32″ double grouser shoes
  • 8 track rollers / 3 carrier rollers (each side)
  • Hydraulic idler cushion (HIC) with shock absorbing accumulator
  • Track guiding guard (Separate type)



  • Dustproof net for radiator and oil cooler
  • Pump/engine room partition cover
  • Power module under cover
  • Travel motor guard



  • Large damper mounted and pressurized mining shovel cab with large tinted windshield, lockable door, large twin wipers and washers, floor mats, cigarette lighter, ashtray and cup holders
  • Instrument panel with electronic display/monitor system (7″-TFTLCD), electrically-controlled throttle dial, electric service meter, gauges (coolant temperature, hydraulic oil temp., fuel level, PTO oil temp., engine oil temp.), truck counters, eco-gauge
  • Built-in top guard conforming to OPG level 2 (ISO)
  • Automatic air conditioners (twin)
  • Seat, fully adjustable air suspension with retractable seat belt
  • Trainer’s seat
  • Sun shield
  • Fire extinguisher



  • EOLSS (Electric Open Center Load Sensing System)
  • 4 variable displacement piston pumps (2 tandem pumps) for work equipment, travel and swing, 2 variable displacement piston pumps (1 tandem pump) for fan drive
  • Two axial piston motors for swing with single stage relief valve
  • One axial piston motor per track for travel with counterbalance valve
  • Four control valves (two integrated valves) for work equipment, swing and travel
  • Control levers for work equipment and swing with PPC system
  • Control levers and pedals for travel with PPC system
  • Oil cooler
  • High-pressure in-line oil filters
  • Drain-filters for pumps & motors
  • Shockless boom control
  • Two-mode pressure setting for boom



  • Planetary travel gear with axial piston motor
  • Travel parking brake



  • Fully-automatic greasing system with 200 liter 52.8 U.S. gal.
  • Manual grease gun for track adjuster
  • Fixed emergency escape ladder
  • Fully hydraulic ladder
  • Fuel tank, 3400 liter 898 U.S. gal.
  • Automatic swing holding brake
  • Emergency engine stop switch and fuel shut-off lever
  • Maintenance light for night
  • Step light with timer
  • Light in machine cab
  • Travel alarm
  • Wide catwalk and large handrail
  • Interconnected horn and flashing light
  • Dual rearview mirrors
  • VHMS (with Orbcomm)


Komatsu PC2000-8 Specs

Model Komatsu SAA12V140E-3
Type 4-cycle, water-cooled, direct injection
Aspiration Turbocharged, aftercooled
Number of cylinders 12
Bore 5.51″ 140 mm
Stroke 6.50″ 165 mm
Piston displacement 1860 in³ 30.48 ltr
Governor All-speed, electronic
SAE J1995 – Gross 976 HP 728 kW
ISO 9249 / SAE J1349 – Net 956 HP 713 kW
Hydraulic fan at maximum speed 910 HP 679 kW
Rated rpm 1800 rpm
Fan drive type Hydraulic
Type Open-center load sensing system
Number of selectable working modes 2
Main pump:
Type Variable displacement piston pumps
Pumps for Boom, arm, bucket, swing and travel circuits
Maximum flow:
For attachment, swing and travel 612.2 U.S. gpm 2317 ltr/min
For fan drive 85.6 U.S. gpm 324 ltr/min
Hydraulic motors:
Travel 2 x axial piston motors with parking brake
Swing 2 x axial piston motors with swing holding brake
Fan 2 x axial piston motors
Relief valve setting:
Attachment circuits:
Backhoe 4,270 psi 29.4 MPa 300 kgf/cm2
Loading shovel 4,270 psi 29.4 MPa 300 kgf/cm2
Travel circuit 4,760 psi 32.9 MPa 335 kgf/cm2
Swing circuit 4,270 psi 29.4 MPa 300 kgf/cm2
Pilot circuit 430 psi 2.9 MPa 30 kgf/cm2
Hydraulic cylinders:
Number of cylinders Bore x Stroke Bore x Stroke
Boom / 2 11.8″ x 104.2″ 300 mm x 2647 mm
Arm / 2 9.8″ x 84.2″ 250 mm x 2138 mm
Bucket 7.9″ x 85.4″ 200 mm x 2170 mm
Loading shovel:
Boom / 2 11.0″ x 76.0″ 280 mm x 1930 mm
Arm / 2 7.9″ x 85.4″ 200 mm x 2170 mm
Bucket / 2 8.9″ x 80.7″ 225 mm x 2050 mm
Bottom dump / 2 7.1″ x 23.6″ 180 mm x 600 mm
Swing gear 2 x Planetary gear
Swing circle lubrication Grease
Swing holding brakes Mechanical disc brakes
Swing speed 4.8 rpm


Travel gear Planetary gear
Gradeability 65%
Maximum travel speed 1.7 mph 2.7 km/h
Parking brakes Mechanical disc brakes
Track adjuster Grease
No. of shoes 49 each side
No. of carrier rollers 3 each side
No. of track rollers 8 each side
Fuel tank 898.3 U.S. gal 3400 ltr
Radiator 47.6 U.S. gal 180 ltr
Engine 31.7 U.S. gal 120 ltr
Travel gear, each side 22.5 U.S. gal 85 ltr
Swing drive 7.9 x 2 U.S. gal 30 x 2 ltr
Hydraulic tank 343.5 U.S. gal 1300 ltr
PTO 7.9 U.S. gal 30 ltr


Komatsu PC2000-8 Hydraulic Excavator Video

So this was all about the Komatsu PC2000-8 Hydraulic Excavator Technical Specifications and other important details. I hope you got all the information which you were searching for online. And also that you enjoyed reading the article if you have any kind of questions or doubts you can comment below in the comment box. I will respond to you as soon as possible. And thanks for reading, stay tuned with me for more stuff like this.


Leave a comment