Table of Contents
Komatsu WA380-8 Specs, HP, Price, weight, lift capacity
Komatsu WA380-8 specs are listed below. When reviewing the technical specifications of the Komatsu WA380-8 Large wheel loader, we advise keeping the model year in mind. The manufacturer’s manuals were used to publish the Komatsu WA380-8 weight, lifting capacity, horsepower, Dimensions, and other specifications. Confirm the technical specifications with your seller before buying the Komatsu WA380-8 Large wheel loader. We will add the Komatsu WA380-8 review video at last of the article to help you with your purchase.
Komatsu WA380-8 Price New
Price: $169,500.00 USD (Approx.)
Komatsu WA380-8 Weight
Operating weight: 18 385 – 19 020 kg 40,532 – 41,932 lbs.
Komatsu WA380-8 Horsepower
Gross Horsepower: 192 HP
Komatsu WA380-8 Specs
Engine
| Model | Komatsu SAA6D107E-3* |
| Type | Water-cooled, 4-cycle |
| Aspiration | Turbo-charged, after-cooled |
| Number of cylinders | 6 |
| Bore x Stroke | 4.21 x 4.88 in |
| Piston displacement | 408 in3 |
| Govenor | All-speed, electronic |
| Horsepower: | |
| SAE J1995 – Gross | 192 HP |
| ISO 9249 / SAE J1349 – Net | 191 HP |
| Rated rpm | 2,100 rpm |
| Fan drive method for radiator cooling | Hydraulic |
| Fuel system | Direct injection |
| Lubrication system: | |
| Method | Gear pump, force-lubrication |
| Filter | Full-flow type |
| Air cleaner | Dry type with double elements and dust evacuator, plus dust indicator |
Transmission
| Torque converter | 3-elements, 1-stage, 2-phase | |
| Transmission | Automatic, full-powershift, counter-shaft type | |
| Travel speed: (Measured with 23.5-25 tires) | Forward | Reverse |
| 1st | 4.1 mph | 4.4 mph |
| 2nd | 7.3 mph | 7.7 mph |
| 2nd (Lock-up clutch ON) | 7.7 mph | 8.3 mph |
| 3rd | 13.0 mph | 13.9 mph |
| 3rd (Lock-up clutch ON) | 13.9 mph | 15.0 mph |
| 4th | 22.4 mph | 24.0 mph |
| 4th (Lock-up clutch ON) | 23.3 mph | 23.3 mph |
Axles and Final Drives
| Drive system | Four-wheel drive |
| Front | Fixed, semi-floating |
| Rear | Center-pin support, semi-floating, 26° total oscillation |
| Reduction gear | Spiral bevel gear |
| Differential gear | Conventional type |
| Final reduction gear | Planetary gear, single reduction |
Brakes
| Service brakes | Hydraulically actuated, wet disc brakes actuate on four wheels |
| Parking brake | Wet disc brake |
| Emergency brake | Parking brake is commonly used |
Steering System
| Type | Articulated type, full-hydraulic power steering |
| Steering angle | 35° (40° to max end stop) |
| Minimum turning radius at the center of outside tire | 20 ft. 9 in |
Hydraulic System
| Steering system: | |
| Hydraulic pump | Piston type |
| Capacity at rated rpm | 36.2 US gpm |
| Relief valve setting | 3,555 psi |
| Hydraulic cylinders: | |
| Type | Double-acting, piston type. |
| Number of cylinders | 2 |
| Bore x stroke | 3.0 x 17.4 in |
| Loader control: | |
| Hydraulic pump | Piston pump |
| Capacity | 54.15 US gpm |
| Relief valve setting | 4,550 psi |
| Hydraulic cylinders: | |
| Type | Double-acting, piston type. |
| Number of cylinders: | Bore x Stroke: |
| Boom cylinder / 2 | 5.1 x 28.1 in |
| Bucket cylinder / 1 | 5.9 x 21.1 in |
| Control valve | 2-spool type |
| Control positions: | |
| Boom | Raise, hold, lower, and float |
| Bucket | Tilt-back, hold, and dump |
| Hydraulic cycle time (rated load in bucket): | |
| Raise | 5.9 s |
| Dump | 1.8 s |
| Lower (Empty) | 3.3 s |
Service Refill Capacities
| Cooling system | 16.0 US gal |
| Fuel tank | 79.3 US gal |
| Engine | 6.1 US gal |
| Hydraulic system | 37.5 US gal |
| Axle (each front and rear) | 10.6 US gal |
| Torque converter and transmission | 14.3 US gal |
| DEF tank | 9.5 US gal |
Komatsu WA380-8 Review Video
That’s all about the Komatsu WA380-8 Specs, Price, Features. I hope you got all the information which you were searching for online. And also that you enjoyed reading the article. If you have any questions or doubts, you can comment below in the comment box. I will respond to you as soon as possible. And thanks for reading; stay tuned for more stuff like this.