Cat 928G Specifications
Cat 928G Engine
| Bore | 4 in (10 cm) |
| Displacement | 366 cu in (0 m) |
| Engine Model | 3116T |
| Net Power | 125 hp (93 kw) |
| Rated Net Power | 143 hp (107 kw) |
| Stroke | 5 in (13 cm) |
Cat 928G Hydraulic System
| Dump Time | 1.2 sec |
| Lower Time | 2.8 sec |
| Raise Time | 6.1 sec |
Cat 928G Loader Hydraulic System
| Bore (1) | 4.8 in (12 cm) |
| Bore (2) | 5 in (13 cm) |
| Dump | 1.2 sec |
| Lower, Empty, Float Down | 2.8 sec |
| Pump Flow – Implement Pump | 40.15 gal/min (152 l/min) |
| Raise | 6.1 sec |
| Relief Valve Setting | 3600 psi |
| Stroke (1) | 27 in (69 cm) |
| Stroke (2) | 21.7 in (55 cm) |
| Total | 10.1 sec |
Cat 928G Operating Specifications
| Articulation Angle | 40 ° |
| Breakout Force | 25849 lbs (11,725 kg) |
| Dump Clearance at Full Lift and 45 degrees Dump Angle | 9.5 ft (3 m) |
| Fuel Capacity | 60.8 gal (230 l) |
| Hydraulic System Fluid Capacity | 33.1 gal (125 l) |
| Operating Weight | 25699.3 lbs (11,657 kg) |
| Reach – Full Lift and 45 degrees Dump | 3 ft (1 m) |
| Static Tipping Load – Full Turn | 18018 lbs (8,173 kg) |
| Static Tipping Weight | 20350.9 lbs (9,231 kg) |
Cat 928G Service Refill Capacities
| Cooling System | 11.1 gal (42 l) |
| Crankcase | 4.2 gal (16 l) |
| Front | 6.9 gal (26 l) |
| Fuel Tank | 59.4 gal (225 l) |
| Hydraulic Tank | 18.5 gal (70 l) |
| Rear | 6.6 gal (25 l) |
| Transmission | 9.1 gal (34 l) |
Cat 928G Steering System
| Maximum Working Pressure | 3000 psi |
| Minimum Turning Radius – Over Tires | 206 in (523 cm) |
| Steering Angle – Each Direction | 40 ° |
| Steering Cylinder, Two, Bore | 2.8 in (7 cm) |
Cat 928G Tires
| Size | 17.5-25PR (L-2) |
| Tread Width | 96 ft (29 m) |
Cat 928G Transmission
| 2 Forward | 7.8 mph (13 kph) |
| 3 Forward | 16 mph (26 kph) |
| 4 Forward | 23.4 mph (38 kph) |
| Forward – 1 | 4.9 mph (8 kph) |
| Max Speed – Forward | 22.9 mph (37 kph) |
| Max Speed – Reverse | 15.3 mph (25 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Reverse – 1 | 4.9 mph (8 kph) |
Cat 928G Weights
| Operating Weight | 27140 lbs (12,311 kg) |
Cat 928G Axles
| Axle Oscillation | 11 ° |
Cat 928G Bucket
| Breakout Force | 25849 lbs (11,725 kg) |
| Bucket Capacities | 2.5 – 3 cu yds (2 – 2 m) |
| Bucket Capacity – heaped | 2.3 cu yds (2 m) |
| Bucket Width | 8.4 ft (3 m) |
| Dump Clearance at Max Raise | 9.5 ft (3 m) |
Cat 928G Cab
| FOPS | SAE J231 JAN81, ISO 3449-1992 Level II |
| ROPS | SAE J1040 MAY94, ISO 3471-1994 |
Cat 928G Dimensions
| Bucket Pin Height – Maximum Lift | 12.4 ft (4 m) |
| Carry Height | 3 ft (1 m) |
| Centerline of Front Axle to Hitch | 4.9 ft (1 m) |
| Digging Depth | 3.4 in (9 cm) |
| Dump Angle at Maximum Lift | 45 ° |
| Dump Clearance at Maximum Lift – 45 degrees | 9.5 ft (3 m) |
| Ground Clearance | 1.4 ft (0 m) |
| Height – Center of Axle | 2.3 ft (1 m) |
| Height – Top of Cab | 10.8 ft (3 m) |
| Height – Top of Hood | 87.6 in (223 cm) |
| Height – Top of ROPS/FOPS | 10.8 ft (3 m) |
| Length – Rear Axle to Bumper | 6.4 ft (2 m) |
| Length with Bucket on Ground | 23.9 ft (7 m) |
| Overall Height | 16.4 ft (5 m) |
| Overall Height – Bucket Raised | 16.4 ft (5 m) |
| Overall Length | 23.1 ft (7 m) |
| Rack Back Angle – Carry | 47.8 ° |
| Rack Back Angle – Maximum Lift | 58 ° |
| Reach at Max Lift and Dump | 3.1 ft (1 m) |
| Reach at Maximum Lift and 45 degrees Dump | 3 ft (1 m) |
| Wheel Base | 9.6 ft (3 m) |
| Wheel Base Length | 9.6 ft (3 m) |
| Width – Over Tires | 77 ft (23 m) |
| Width Over Tires | 8.1 ft (2 m) |