Caterpillar 980h Specs – CATERPILLAR 980H WHEEL LOADER

Caterpillar 980h Specs

Caterpillar 980h Specs

Caterpillar 980h Engine

Bore 5.4 in (14 cm)
Displacement 928 cu in (0 m)
Engine Model Cat C15 ACERT
Gross Power 355 hp (265 kw)
Gross Power – SAE J1995 393 hp (293 kw)
Make Cat
Model C15
Net Power 318 hp (237 kw)
Net Power – 80/1269/EEC 353 hp (263 kw)
Net Power – ISO 9249 349 hp (260 kw)
Net Power – SAE J1349 349 hp (260 kw)
Number of Cylinders 6
Power Measured @ 1800 rpm
Stroke 6.8 in (17 cm)

Caterpillar 980h Hydraulic System

Bucket/Work Tool System – Pump Output 123 gal/min (466 l/min)
Dump Time 2.1 sec
Hydraulic Cycle Time – Dump 2.1 sec
Hydraulic Cycle Time – Lower, Empty, Float Down 3.4 sec
Hydraulic Cycle Time – Raise 6 sec
Hydraulic Cycle Time – Total 11.5 sec
Lower Time 3.4 sec
Pump Flow Capacity 123 gal/min (466 l/min)
Pump Type Gear
Raise Time 6 sec
Relief Valve Setting 3000 psi

Caterpillar 980h Operating Specifications

Alternator Supplied Amperage 80 A
Breakout Force 44775 lbs (20,310 kg)
Cooling System Fluid Capacity 22 gal (83 l)
Dump Clearance 10843.2 ft (3,305 m)
Engine Oil Fluid Capacity 10 gal (38 l)
Front Axle/Diff Fluid Capacity 23 gal (87 l)
Fuel Capacity 127 gal (481 l)
Hydraulic System Fluid Capacity 66 gal (250 l)
Operating Voltage 24 V V
Operating Weight 66489.3 lbs (30,159 kg)
Rated Bucket Capacity 5 – 8 cu yds (4 – 6 m)
Rear Axle Oscillation 26 °
Rear Axle/Diff Fluid Capacity 23 gal (87 l)
Static Tipping Load – Full Turn 42989 lbs (19,500 kg)
Static Tipping Weight 50201 lbs (22,771 kg)
Tire Size 29.5-25
Transmission Fluid Capacity 16 gal (61 l)
Turning Radius 26.1 ft (8 m)

Caterpillar 980h Service Refill Capacities

Cooling System 22 gal (83 l)
Crankcase 17 gal (64 l)
Differential – Final Drives – Front 23 gal (87 l)
Differential – Final Drives – Rear 23 gal (87 l)
Fuel Tank – Standard 127 gal (481 l)
Hydraulic Tank 33 gal (125 l)
Transmission 16 gal (61 l)

Caterpillar 980h Tires

Tires Choose from a variety of tires to match your application.

Caterpillar 980h Transmission

Forward – 1 4.1 mph (7 kph)
Forward – 2 7.3 mph (12 kph)
Forward – 3 12.9 mph (21 kph)
Forward – 4 22.6 mph (36 kph)
Max Speed – Forward 22.6 mph (36 kph)
Max Speed – Reverse 25.8 mph (42 kph)
Number of Forward Gears 4
Number of Reverse Gears 4
Reverse – 1 4.7 mph (8 kph)
Reverse – 2 8.4 mph (14 kph)
Reverse – 3 14.7 mph (24 kph)
Reverse – 4 25.8 mph (42 kph)
Transmission Type Powershift

Caterpillar 980h Weights

Operating Weight 67294 lbs (30,524 kg)
Operational Weight 68489 lbs (31,066 kg)

Caterpillar 980h Axles

Front Fixed front
Maximum Single-Wheel Rise and Fall 21.7 in (55 cm)
Rear Oscillating +/- 13?

Caterpillar 980h Brakes

Brakes Meets required standards.

Caterpillar 980h Bucket

Breakout Force 61425 lbs (27,862 kg)
Breakout Force – Reference Bucket 61372.9 lbs (27,839 kg)
Bucket Capacities 8 YARDS
Bucket Capacity – heaped 5.5 cu yds (4 m)
Bucket Capacity – struck 4.8 cu yds (4 m)
Bucket Width 11.6 ft (4 m)
Dump Clearance at Max Raise 10.9 ft (3 m)
Maximum Bucket Capacity 8 cu yds (6 m)
Reference Bucket Capacity 5.5 cu yds (4 m)
Type – Reference bucket General purpose with Teeth

Caterpillar 980h Cab

ROPS/FOPS Meets SAE and ISO standards.

Caterpillar 980h Dimensions

B-Pin Height – Standard 14.8 ft (5 m)
Centerline of Rear Axle to Hitch 72.9 in (185 cm)
Centerline Rear Axle to Edge of Counterweight 8.2 ft (3 m)
Ground Clearance 1.5 ft (0 m)
Height – Top of Cab 12.4 ft (4 m)
Height – Top of Exhaust 146.3 in (372 cm)
Height – Top of Hood 107 in (272 cm)
Height – Top of ROPS/FOPS 12.4 ft (4 m)
Hinge Pin – Max Height 14.8 ft (5 m)
Length with Bucket on Ground 31.1 ft (9 m)
Reach at Max Lift and Dump 5.1 ft (2 m)
Wheel Base 12.2 ft (4 m)
Wheelbase 12.2 ft (4 m)
Width Over Tires 10.6 ft (3 m)
0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments