Caterpillar 980h Specs
Caterpillar 980h Engine
Bore | 5.4 in (14 cm) |
Displacement | 928 cu in (0 m) |
Engine Model | Cat C15 ACERT |
Gross Power | 355 hp (265 kw) |
Gross Power – SAE J1995 | 393 hp (293 kw) |
Make | Cat |
Model | C15 |
Net Power | 318 hp (237 kw) |
Net Power – 80/1269/EEC | 353 hp (263 kw) |
Net Power – ISO 9249 | 349 hp (260 kw) |
Net Power – SAE J1349 | 349 hp (260 kw) |
Number of Cylinders | 6 |
Power Measured @ | 1800 rpm |
Stroke | 6.8 in (17 cm) |
Caterpillar 980h Hydraulic System
Bucket/Work Tool System – Pump Output | 123 gal/min (466 l/min) |
Dump Time | 2.1 sec |
Hydraulic Cycle Time – Dump | 2.1 sec |
Hydraulic Cycle Time – Lower, Empty, Float Down | 3.4 sec |
Hydraulic Cycle Time – Raise | 6 sec |
Hydraulic Cycle Time – Total | 11.5 sec |
Lower Time | 3.4 sec |
Pump Flow Capacity | 123 gal/min (466 l/min) |
Pump Type | Gear |
Raise Time | 6 sec |
Relief Valve Setting | 3000 psi |
Caterpillar 980h Operating Specifications
Alternator Supplied Amperage | 80 A |
Breakout Force | 44775 lbs (20,310 kg) |
Cooling System Fluid Capacity | 22 gal (83 l) |
Dump Clearance | 10843.2 ft (3,305 m) |
Engine Oil Fluid Capacity | 10 gal (38 l) |
Front Axle/Diff Fluid Capacity | 23 gal (87 l) |
Fuel Capacity | 127 gal (481 l) |
Hydraulic System Fluid Capacity | 66 gal (250 l) |
Operating Voltage | 24 V V |
Operating Weight | 66489.3 lbs (30,159 kg) |
Rated Bucket Capacity | 5 – 8 cu yds (4 – 6 m) |
Rear Axle Oscillation | 26 ° |
Rear Axle/Diff Fluid Capacity | 23 gal (87 l) |
Static Tipping Load – Full Turn | 42989 lbs (19,500 kg) |
Static Tipping Weight | 50201 lbs (22,771 kg) |
Tire Size | 29.5-25 |
Transmission Fluid Capacity | 16 gal (61 l) |
Turning Radius | 26.1 ft (8 m) |
Caterpillar 980h Service Refill Capacities
Cooling System | 22 gal (83 l) |
Crankcase | 17 gal (64 l) |
Differential – Final Drives – Front | 23 gal (87 l) |
Differential – Final Drives – Rear | 23 gal (87 l) |
Fuel Tank – Standard | 127 gal (481 l) |
Hydraulic Tank | 33 gal (125 l) |
Transmission | 16 gal (61 l) |
Caterpillar 980h Tires
Tires | Choose from a variety of tires to match your application. |
Caterpillar 980h Transmission
Forward – 1 | 4.1 mph (7 kph) |
Forward – 2 | 7.3 mph (12 kph) |
Forward – 3 | 12.9 mph (21 kph) |
Forward – 4 | 22.6 mph (36 kph) |
Max Speed – Forward | 22.6 mph (36 kph) |
Max Speed – Reverse | 25.8 mph (42 kph) |
Number of Forward Gears | 4 |
Number of Reverse Gears | 4 |
Reverse – 1 | 4.7 mph (8 kph) |
Reverse – 2 | 8.4 mph (14 kph) |
Reverse – 3 | 14.7 mph (24 kph) |
Reverse – 4 | 25.8 mph (42 kph) |
Transmission Type | Powershift |
Caterpillar 980h Weights
Operating Weight | 67294 lbs (30,524 kg) |
Operational Weight | 68489 lbs (31,066 kg) |
Caterpillar 980h Axles
Front | Fixed front |
Maximum Single-Wheel Rise and Fall | 21.7 in (55 cm) |
Rear | Oscillating +/- 13? |
Caterpillar 980h Brakes
Brakes | Meets required standards. |
Caterpillar 980h Bucket
Breakout Force | 61425 lbs (27,862 kg) |
Breakout Force – Reference Bucket | 61372.9 lbs (27,839 kg) |
Bucket Capacities | 8 YARDS |
Bucket Capacity – heaped | 5.5 cu yds (4 m) |
Bucket Capacity – struck | 4.8 cu yds (4 m) |
Bucket Width | 11.6 ft (4 m) |
Dump Clearance at Max Raise | 10.9 ft (3 m) |
Maximum Bucket Capacity | 8 cu yds (6 m) |
Reference Bucket Capacity | 5.5 cu yds (4 m) |
Type – Reference bucket | General purpose with Teeth |
Caterpillar 980h Cab
ROPS/FOPS | Meets SAE and ISO standards. |
Caterpillar 980h Dimensions
B-Pin Height – Standard | 14.8 ft (5 m) |
Centerline of Rear Axle to Hitch | 72.9 in (185 cm) |
Centerline Rear Axle to Edge of Counterweight | 8.2 ft (3 m) |
Ground Clearance | 1.5 ft (0 m) |
Height – Top of Cab | 12.4 ft (4 m) |
Height – Top of Exhaust | 146.3 in (372 cm) |
Height – Top of Hood | 107 in (272 cm) |
Height – Top of ROPS/FOPS | 12.4 ft (4 m) |
Hinge Pin – Max Height | 14.8 ft (5 m) |
Length with Bucket on Ground | 31.1 ft (9 m) |
Reach at Max Lift and Dump | 5.1 ft (2 m) |
Wheel Base | 12.2 ft (4 m) |
Wheelbase | 12.2 ft (4 m) |
Width Over Tires | 10.6 ft (3 m) |